Allegro Balanced XLR Interconnect Cables
Audio enthusiasts, are you looking for audiophile-grade balanced XLR interconnect cables that not only excel with their sonic purity and are very affordable but that are thin (6mm diameter) and flexible? Our Allegro series Balanced XLR Interconnects are easily dressed in your equipment rack for short runs or along the floor/wall interface when connecting up a pair of mono block amplifiers sitting some distance away from the main equipment rack itself. Balanced XLR cables should be used (if the ancillary equipment supports it) in applications where longer signal-cable runs are required as they are less susceptible to electrical interference and noise due to their inherent common-mode noise rejection design properties. We think you'll appreciate the slightly warm, even-handed and transparent sound qualities that the Allegro Balanced XLR audio cables can bring to a system. Knowing that just one cable interconnect choice won't always be the right fit for everyone, if your audio interconnect needs require a bit more energy or dynamics or detail from a balanced XLR cable, you might want to take a look at our Vivace series reference level Balanced XLR Interconnects as a possible alternative to Allegro.
The Allegro fully balanced cable design (XLR-Female to XLR-Male) is capable of feeding a clean and sonically accurate signal up to 300+ feet long. Now, most audiophiles would never have the need to run cables that far, but rest assured if you have an equipment rack back near your listening seat and want to run a pair of audio interconnects from there and around the room perimeter to a pair of mono amps sitting adjacent to your speakers, these audio cables are more than capable of doing so... and won't break the bank getting it done.
Avanti Audio Allegro Balanced XLR audio cables provide the listener high end audiophile performance by way of utilizing a wide bandwidth, ultra-fine stranded OFC copper conductor cable design that is extremely well shielded to keep RFI/EMI and other unwanted noise and disturbances out of the signal chain. This is an especially important consideration when longer cable lengths are needed over those found in a typical centralized equipment rack situation where all interconnects can remain short. The last thing you want is to have your long cables act like antennas and bleed noise into your music!
Staying true to the build quality of all Avanti Audio interconnects since the beginning, quality control is attained with small batch production scrutinizing each step of the build process and all connections are professionally assembled & soldered exclusively with Cardas Quad Eutectic Solder.
Allegro balanced interconnects are offered with Neutrik gold pin, black metal shell XLR connectors. These connectors are very well known for their high quality, professional endurance and performance-to-price ratio and come standard on all Allegro Balanced XLR Interconnects.
Allegro Balanced Interconnect Specifications:
- 26Ga aggregate OFC ultra-fine stranded copper
- Low capacitance cable @ 44pf/0.5M
-
Neutrik gold pin XLR connectors
-
Fully balanced, shielded cable design
- 48 hour cable conditioning service included
-
Email to inquire about custom lengths
Avanti Audio Balanced XLR pinout standard is + (plus) signal to pin #2 | - (minus) signal to pin #3 | shield to pin #1
